Part Number Hot Search : 
SKY77 18000 G7PH35UD TDA5737M S30D40C OP484 74LVCH A5800290
Product Description
Full Text Search
 

To Download EM6DLP-100L Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 05253
EM6DLP-100L
EMI FILTER/TVS ARRAY
APPLICATIONS
Cellular Phones Color LCD Display Panel Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards
IEC COMPATIBILITY (EN61000-4)
61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns
DFN-12LP
FEATURES
ESD Protection > 25 kilovolts EMI Filtering/TVS Low Pass Filters Blocking Rectifier > 25db Attenuation from 800MHz to 3GHz Protects up to Six(6) Data Lines RoHS Compliant
MECHANICAL CHARACTERISTICS
DFN-12LP Package Available Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C Consult Factory for Leaded Device Availability Flammability Rating UL 94V-0 Device Marking: Marking Code 8mm Tape and Reel Per EIA Standard 481
PIN CONFIGURATION
For Each Line
I/On 100 Ohm I/On
1
2
3
4
5
6
GND
10pF GND 10pF
12 11 10
Note: I/O connected from pins 1-12, 2-11, 3-10, 4-9, 5-8 and 6-7.
9
8
7
BOTTOM VIEW
05253.R1 2/07
1
www.protekdevices.com
EM6DLP-100L
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25C Unless Otherwise Specified
PARAMETER
Operating Temperature Storage Temperature DC Power Per Resistor Typical Resistance @ 20% Soldering Temperature for 10 seconds
SYMBOL
TA TSTG P R TL
VALUE
-40 to 85 -55 to 150 400 100 265
UNITS
C C mW OHMS C
ELECTRICAL CHARACTERISTICS PER LINE
PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT @3V ID A 0.1
@ 25C Unless Otherwise Specified MINIMUM ATTENUATION CUT-OFF FREQUENCY (50 OHMS I/O) ZERO BIAS TYPICAL CAPACITANCE (See Note 1)
TYPICAL FORWARD VOLTAGE
VWM VOLTS EM6DLP-100L 6LP 5.0
@ 1mA V(BR) VOLTS 6.0
@10mA VF VOLTS 0.8
@ 800-3000 MHz dB 25
fC MHz 150
@2.5V, 1MHz C pF 20
Note 1: 32pF @ 0V, 1MHz, 20% tolerance.
FIGURE 1 INSERTION LOSS
0 -5 -10
Gain (dB)
-15 -20 -25 -30 -35 0.1 1 10 100
2.5 Volts
0 Volts
1000
10000
Frequency (MHz)
05253.R1 2/07
2
www.protekdevices.com
EM6DLP-100L
GRAPHS
1.100
FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C)
Normalized Resistance
1.060
1.020
0.980
0.940
0.900 -40 -20 0 20 40 Temperature C 60 80 100
1.6
Cj - Capacitance (Normalized)
FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25C)
1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6
VR - Reverse Voltage - Volts
FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter)
35
5 Volts per Division
25
15
5
-5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform)
05253.R1 2/07
3
www.protekdevices.com
EM6DLP-100L
DFN-12LP PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
P1
PACKAGE DIMENSIONS
MILLIMETERS DIM P1 P2 P3 L1 L2 L3 p G1 G2 G3 G4 MIN 2.90 1.50 0.50 0.23 0.23 0.13 0.50 1.90 0.30 0.15 0.25 MAX 3.10 1.70 0.60 0.30 0.30 0.18 0.50 2.10 0.40 0.25 0.35 INCHES MIN 0.114 0.059 0.020 0.009 0.009 0.005 0.020 0.075 0.012 0.006 0.010 MAX 0.122 0.067 0.024 0.012 0.012 0.007 0.020 0.083 0.016 0.010 0.014
P2 Pin 1 Reference TOP VIEW L3 P3 p SIDE VIEW
NOTES: 1. Controlling dimensions in millimeters 2. Dimension b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. 4. Dimension p is BSC. TAPE & REEL ORDERING NOMENCLATURE
L2 1
L1 6
1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T71 = 7 Inch Reel - 1,000 pieces per 8mm tape, i.e., EM6DLP-100L-T71. 3. Suffix-T73 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., EM6DLP-100L-T73. 4. Suffix- LF = Lead-Free, Pure Tin Plating, i.e., EM6DLP-100L-LF-T73.
12 G3 G1 BOTTOM VIEW
7 G4
G2
Outline & Dimensions: Rev 0 - 4/06, 06066
Tape & Reel Specifications (Dimensions in millimeters)
Reel Dia. 178mm (7")/330mm(13") Tape Width 8mm A0 B0 K0 D E F W P0 P2 P t
1.90 0.10 3.25 0.10 0.80 0.10 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10 0.300.05
P0 t D P2 10 Pitches Cumulative Tolerance on Tape. 0.2
E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot
F
W
P
User Direction of Feed
COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com
05253.R1 2/07
4
www.protekdevices.com


▲Up To Search▲   

 
Price & Availability of EM6DLP-100L

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X